3M Multi-Gas/Vapor With P100 Filter Cartridge For 7500 Half-Mask And 6000 Full And Half-Mask

• For use with the M7500, 6000 and F6000 respirators

• Provides respiratory protection from certain organic vapors and particulates, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde and hydrogen fluoride.
• NIOSH approved!
• Cartridge includes permanently attached P100 filter.
• Sold per pair.
• For use with the M7500, 6000 and F6000 respirators
• At least 99.97 filter efficient when tested with ~0.3 um DOP (Dioctyl Phthalate) aerosol.
• P Series Filters are intended for removal of any particle including oil* based liquid aerosols and can be used for any solid or liquid particulate airborne hazard.

P100 Particulate Filter – At least 99.97 filter efficient when tested with ~0.3 um DOP (Dioctyl Phthalate) aerosol. P-Series Filters are intended for removal of any particle including oil*-based liquid aerosols and can be used for any solid or liquid particulate airborne hazard. NIOSH recommends that respirator manufacturing establish time use limitations for all P-series filters. P-series filters can be used and/or reused for no more than 40 hours of use or 30 days, whichever occurs first, in atmosphere that contain oil* aerosols unless the filter needs to be changed for hygiene reasons, is damaged, or becomes difficult to breathe through before the time limit is reached. When used in atmospheres containing nonoil* aerosol, P-series filters should be used and reused subject to conditions of hygiene, damage and increased breathing resistance.

What types of hazards can the 3M Multi Gas/Vapor with P100 Filter Cartridge protect against?
The cartridge can provide respiratory protection against certain organic vapors and particulates, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde and hydrogen fluoride.

What types of respirators is this cartridge compatible with?
The cartridge is compatible with the M7500, 6000, and F6000 respirators.

What is the filter efficiency rate of the P100 Particulate Filter?
The P100 Particulate Filter has a filter efficiency rate of at least 99.97% when tested with ~0.3 um DOP (Dioctyl Phthalate) aerosol.

What are the time use limitations for the P Series Filters?
NIOSH recommends that respirator manufacturers establish time use limitations for all P Series Filters. P series filters can be used and/or reused for no more than 40 hours of use or 30 days, whichever occurs first, in atmosphere that contain oil* aerosols unless the filter needs to be changed for hygiene reasons, is damaged, or becomes difficult to breathe through before the time limit is reached. When used in atmospheres containing nonoil* aerosol, P series filters should be used and reused subject to conditions of hygiene, damage and increased breathing resistance.

3M Respirator Guide